Panasonic EH-SW50

26
English
How to check the fully charged condition
Press the “电源/温度” (power/
temperature) switch when the AC
adaptor is connected.
The charging indicator lamp glows,
and after approximately 5
seconds, the lamp turns off.
4
4
Remove the adaptor from
the household outlet and
the appliance plug from
the appliance socket.
How to recharge
1
1
Insert the appliance plug
into the appliance socket.
2
2
Insert the adaptor into the
household outlet.
3
3
Check the charging
indicator lamp.
•The charging indicator lamp
glows red.
•If charging is tried during use,
the operation stops, and
charging starts.
After approximate 1 hour, charging fully completes
•Charging time shortens if there is still some charge
remaining in the battery.
•The charging indicator lamp goes out when the
appliance is fully charged.
EH-SW50_CH.indb 26 2013/04/16 19:42:51