EN8
Setting up the position of the massage lounger
Please decide the place to set before taking it
out of the box.
z
Please install near the
power outlet.
z
Avoid installing in places where direct sunlight strikes for
a long time every day or high temperature such as near
heating equipment.
The surface material may discolor or
deteriorate.
z
Because it may damage the flooring, we
recommend placing a mat etc under the main
unit. Size to cover the part where the body and
the leg/foot massage section are grounded.
Minimum width 63 cm × depth 104 cm
z
Please install so that the back of
the main unit does not come in
contact with walls and objects.
(
It may cause breakdown, such
as deforming the back side.
)
Approx. 30 cm
or more
( When the
backrest is
fully up)
Separate from wall by 5 cm or more (when the backrest is completely down)
Depth of approx. 160 cm (approx. 170 cm when sliding the leg/foot massage section)
Approx. 140 cm
Approx. 68 cm
Mat etc.
A portion where the body and
leg/foot massage section are
grounded : Approx. 102 cm
Secure enough space
to operate the power
switch section on the
back of the main unit.
(Approx. 30 cm to the
back and both sides)
To Next Page
Loading...
