Panasonic EP-MAC8

Method to change the
massage mode
Set as you like
（
EN28
）
EN24
"MANUAL" massage
(continued)
When you want to select another
program among the "AUTO" programs:
Method to select the "AIR / STRETCH"
massage mode:
Press and select
as needed
（
EN19
）
(All the massage movements will pause.)
Method to select the "MANUAL" program:
Press
（
EN23)
( All the massage movements will pause.)
After is pressed, the unit will begin to
massage with the massage actions selected.
ㅡCorresponding light of the selected
massage action will remain lit.
ㅡCorresponding light of the selected
massage action will remain lit.
ㅡCorresponding light of the selected
massage action will remain lit.
After selecting a massage mode
through ▲ or ▼, press ► to display
other massage modes that can be
combined with it.
[Example] After "Neck roll/kneading"
is selected, the "Quick
tap", or "Slow tap" in
the "Tap" type may be
selected.
Combination of multiple massage actions
[Example] Combination of "Kneading (Upward
kneading)", "Tap (Quick tap)" and
"Stretch (Partial stretch)".
▪
Reference
①
Select “Kneading” from the
massage modes through ▲ or ▼
②
Select "Upward kneading" through
◄ or ►
③
Press ▼ to make the cursor
direct against "Tap". Select "Quick
tap" through ►
④
Select "Stretch" through ▼. Select
"Partial stretch" through ► .
Press ► to make corresponding light of the
selected massage action icker again (it has
remained lit before).
To cancel all the selected massage actions,
press .
Suspend the current massage by
pressing and then
press
(EN26)
z After massaging a single part for 5 minutes, the
product will beep and, for safety, the massage heads
will move automatically.
Method to cancel the selected massage
action during selection