16
English
3) A double beep and the flashing of indicate that the
massage heads are being finely adjusted to the shoulder
position.
[Shoulder Position Adjustment Mode]
<How to adjust>
Press or to adjust the
position.
[Each press moves the massage heads
approximately 0.6 in. (1.5 cm).]
4) When the shoulder position is matched, press to
begin the program.
The program will begin automatically after 15 seconds if the button
is not pressed.
•
Caution
Keep your head on the backrest
while shoulder position is being
determined.
If the shoulder position cannot be
correctly determined, an error
message (U10) is displayed and
operations are terminated.
Notes
<Target shoulder position>
Too high
Correct position of the massage
head
(The point where the tapping
action should be felt)
Too low
To Customize
To adjust program intensity
Press the – + adjustment buttons.
Content of
display
Intensity
1 2 3
Adjustment
To use the leg/foot massage simultaneously
Press the button.
(See page 23.)
To Next Page
Loading...
