To Customize
To adjust the position
Press or to adjust.
Each press moves the massage heads
approximately 1.5 cm.
When you hold down the button, the operation
will continue until you release it.
•
•
Flashing indicates the approximate current
position.
To adjust program intensity
Press the – + adjustment buttons.
Content of
display
Intensity
1 2 3
Adjustment
To continue exclusively with a single operation such as Soft Shiatsu or Knead
Press the button during an operation to continue the same operation only.
To change the operation, press the button again. The operations will then change automatically in sequence.•
To use the leg/foot massage simultaneously
Press the button.
(See page 21.)
To change the content of the massage
To change to Self Program
Press the button and select a program.
Upper body massage will stop temporarily.
(See page 17.)
To change to Pre-Programs
Press the button and select a program.
Upper body massage will stop temporarily.
(See page 14.)
To Next Page
Loading...
