9  Fasten the A, B, and C fasteners 
(5 locations) while pulling on the cover. 
Fasteners B and C are not visible from the outside.
Flatten the wrinkles using your palms, and fasten C 
at the bottom. 
•
•
(Other side too)
(Other side too)
10 Pull out the leg/foot massage lock 
release band from the slit in the cover. 
When wrinkles and sags are noticeable in the lounger cushion or unit cover
Unit cover
1  Wrinkles in the backrest: Gently rub 
towards the edges.
2  Seat wrinkles: Unfasten the fastener, and 
then refasten while pulling forward on the 
fabric.
Lounger cushion cover
Pat the front and rear a few times to distribute 
the cushion more evenly and reduce the 
amount of wrinkles. 
*  During use, the fabric may stretch slightly, making it easier for wrinkles to form. 
If fold marks are noticeable, iron the cover. (See page 24.)
Optional parts
Recommended for when changing to a different color, or when you are worried about dirt on the unit. 
Product name: Massage Lounger Cover Set
EP-2M41
EP-MS41_ASIA.indb   28 2014-10-21   13:21:16