What to do if my Panasonic Massager won't operate at all?
If your Panasonic Massager isn't operating, there are a few potential causes: 1. The power cord may be disconnected. Reconnect the power cord. 2. The power switch on the unit may not be turned on. Turn on the power switch. 3. A Pre-Program button or Manual Operation button hasn’t been pressed after pressing the power button. Press a Pre-Program button or Manual Operation button.
What to do if the massage heads stop during operation of my Panasonic Massager?
If the massage heads on your Panasonic Massager stop during operation, it may be due to excessive force being applied to them. In this case, disconnect the power.
How to fix motor noises of the backrest or legrest in Panasonic Massager?
If you are experiencing motor noises from the backrest or legrest of your Panasonic Massager, check that there is nothing obstructing their movement in the vicinity. Return the legrest to the original position.
What to do if my Panasonic Massager power cord is abnormally hot?
If you notice that the power cord or power plug of your Panasonic Massager is abnormally hot, it indicates that the unit has been damaged. You should stop using the unit immediately.
Why is my Panasonic Massager making a humming sound when turned on?
The humming sound you hear when you turn on your Panasonic Massager is related to the air massage function. These sounds are perfectly normal and will not affect the operation of the unit.
Why reclining does not take place even though a massage is started in pre-programs in Panasonic Massager?
Reclining may not activate in your Panasonic Massager when a massage is started in pre-programs because the seat may not automatically recline depending on the position (angle) of the backrest or the legrest. Reclining will not activate when the backrest is reclined to flat position more than massage position and legrest is in upper position.
What to do if the backrest does not return to the upright position in Panasonic Massager?
If the backrest of your Panasonic Massager does not return to the upright position, and the length of the legrest has been extended, retract it to its original length.
What to do if there is a rattling sound when the massage heads move up or down in Panasonic Massager?
If you hear a rattling sound when the massage heads move up or down in your Panasonic Massager, the backrest and legrest can be returned with the reclining button. Pull the legrest slide lever back.
What to do if there is a strange sound when the massage heads move in and out in Panasonic Massager?
If you notice a strange sound when the massage heads move in and out on your Panasonic Massager, press the OFF/ON button twice.
What to do if there is a noise when the backrest cushion moves over the armrest when the seat is reclining in Panasonic Massager?
If you hear a noise when the backrest cushion moves over the armrest while the seat is reclining in your Panasonic Massager, pull the legrest slide lever back.
Precautions to prevent electric shock hazards.
Key warnings to prevent burns, fire, electric shock, or injury.
Instruction to retain the safety manual for future reference.
Consult physician for specific medical conditions before use.
Precautions to prevent damage to the massage chair during operation.
Warning about risks of improper grounding and electrical shock.
Information on circuit voltage and grounding plug illustration.
Identification of the massage lounger components and their functions.
Identification of controller buttons and indicators.
Instructions for attaching the sole shiatsu sheet.
Guidelines for selecting a safe and appropriate location for the unit.
Instructions on how to safely move the unit using its wheels.
Method for lifting and moving the unit manually.
Includes unpacking, checking contents, and raising the backrest.
Procedure for attaching, securing armrests, and closing zippers.
Warnings about potential injury or damage during repacking.
Steps to power down, unplug, and remove components for repacking.
Procedure to release the backrest latch using a screwdriver.
Ensuring the area is clear and checking unit condition.
Steps to safely power on the unit and adjust the pillow height.
Initiating the controller and choosing a desired pre-set massage program.
Proper posture and fine-tuning massage heads for effective shoulder massage.
Explanation of the time display and characteristics of different massage types.
Steps to access and turn on manual massage controls.
Choosing massage actions and adjusting head position, width, and speed.
Information on automatic shutdown and how to stop massages.
Focusing massage on specific areas and disabling tapping in pre-programs.
Instructions for adjusting and operating leg massage and stretch functions.
Turning on the controller and activating the leg massage function.
Adjusting leg massage intensity, stretch, and understanding auto shut-off.
Details on leg function operation and how to stop the massage.
Instructions for returning the seat and legrest to their original positions.
Steps to safely disconnect power and store components.
Instructions for cleaning leather, plastic, pipes, and coated fabric.
Troubleshooting motor noises and massage head stopping issues.
Resolving incorrect head positioning, reclining failures, and unit non-operation.
Safety warning and troubleshooting for hot power components.
General| Reclining | Yes |
|---|---|
| Model | EP1285 |
| Massage Techniques | Kneading, Rolling, Tapping, Shiatsu |
| Heat | Yes |
| Air Massage | Yes |
| Power Source | AC Power |
| Auto Shut-off | Yes |
To Next Page
