ER-GB80/ER-GB70/ER-GB60
6
4.2. Assembly Instructions
1. Rechargeable battery
Insert the rechargeable battery into the battery holder.
NOTE:
Make sure to attach the washer and O-ring to the bat-
tery terminal.
And apply the grease (FLOIL G741S).
2. Motor
Apply the grease (FLOIL G741S) on the motor balancer.
Insert the motor into the motor holder with the confirma-
tion of the direction.
3. Driving head
Insert a motor tip pin into the hole of driving head and fit
the projections of housing into the holes of driving head.
4. Dial lever
Attach the dial lever to the housing.
To Next Page
Loading...
