Panasonic ER-GC71 - Specifications

19
English
Thisfiguremustonlybeusedwhendisposingofthe
clipper, and must not be used to repair it. If you
dismantle the clipper yourself, it will no longer be
waterproof, which may cause it to malfunction.
•Remove the clipper from the AC adaptor.
•Slide the power switch to turn on the power and then
keep the power on until the battery is completely
discharged.
•Perform steps 1 to  and lift the battery, and then
remove it.
•Take care not to short-circuit the positive and negative
terminals of the removed battery, and insulate the
terminals by applying tape to them.














For environmental protection and recycling of
materials
This clipper contains a Nickel-Metal Hydride battery.
Please make sure that the battery is disposed of at an
officiallyassignedlocation,ifthereisoneinyour
country.
Specications
Power source
See the name plate on the AC
adaptor.
(Automatic voltage conversion)
Motor voltage
1.2 V
Charging time Approx. 8 hours
Airborne
Acoustical Noise
60 (dB (A) re 1 pW)
This product is intended for household use only.
PB017706 - ER-GC63 53������_(01GB)_04-25-19.indd 19 2019/4/25 15:04:18