Charging
Make sure that the main body is turned off.
1. Connect the appliance plug to the appliance socket.
2. Plug the adaptor into a household outlet.
Check that the charge status lamp ( ) glows.
Charging is completed after approx. 1 hour.
If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper
configuration.
3. Disconnect the adaptor when the charge status lamp stops glowing.
(for safety and to reduce energy usage)
<How to check if the charging is completed> Remove and reinsert the appliance plug. If the charge status lamp
glows and turns off after approximately 5 seconds, it is completed.
You cannot operate the main body while charging.
Notes:
If there is noise from the radio or other sources while using or charging the appliance, move to a different
location to use the appliance.
When the appliance has not been used for 6 months or more, the battery will weaken (leak battery fluid, etc.).
Fully charge the battery once every 6 months.
When the appliance is charged for the first time or it has not been in use for more than 6 months, the charging
time may change or the charge status lamp ( ) may not glow in the first few minutes. In addition, the operating
time may become shorter. Please charge it for more than 8 hours in such cases.
Recommended ambient temperature for charging is 0 °C – 35 °C (32 °F – 95 °F). The charging time may
change or battery performance may decrease outside of the recommended temperature.
A full charge supplies enough power for approximately 50 minutes of use. (Based on using at 20 °C – 30 °C (68
°F – 86 °F).) The operating time may differ depending on the frequency of use and the operating method.
You can charge the battery before it is completely discharged. However, it is recommended to charge when the
battery is completely discharged. The battery life depends strongly on factors such as how it is used and stored.
Read before use
To Next Page
Loading...
