9
English
Before requesting repair
Please check the following:
Problem Possible cause Action
The cutting
performance has
reduced.
Deformation of the
blade
Replace the
blade.
Wear in the blade
(Guideline for blade
replacement:
approx. 3 years)
The battery is
discharged.
Replace the
battery.
The inner blade is
not clean.
Clean the inner
blade.
There is an odd
odour.
Blade does not
move/rotate
smoothly.
Replacement blade
To maintain sharp cutting performance, it is recommended that the
blade is replaced approximately every 3 years.
When replacing the blade, replace both the outer blade and the
inner blade at the same time.
SPECIFICATIONS
Model No. ER‑GN30
Power source
AA (LR6) alkaline dr
y‑cell battery
(Sold separately)
This product is intended for household use only.
10 / 22
To Next Page
