7
English
4
4
Cut the hair by moving it slowly against the growth
of the hair.
The outer blade surface may get a little warm during use, but
performance will not be affected.
•
Clean
Cleaning your trimmer
There are 3 ways to clean the appliance: “Jet wash cleaning”,
“Water wash cleaning”, and “Brush cleaning”.
It is recommended to clean at every use.
Water wash cleaning
Notes
Do not use kitchen detergents, bathroom cleaner, toilet
detergents, or hot water. Doing so may result in malfunction.
The battery cover should not be taken apart as this can affect
the watertight construction of the appliance.
•
•
1. Wet the outer blade with water,
and apply hand soap or
cleaning fluid (optional).
2
. Slide the power switch to the “1”
position, and let it foam for
approximately 10 seconds.
▼ ▼
Jet wash cleaning Water wash cleaning
3. Align the wash switch ring to
“
”.
The water outlet (a)
opens.
•
3. Slide the power switch to the
“0” position and remove the
blade.
▼ ▼
8 / 22
To Next Page
Loading...
