Panasonic ES-EL9A - Page 19

19
English
1
1
Attach the foot care head [H].
• Push down rmly until you hear a “click”.
2
2
Select the mode by pressing the power switch
[
Kr ].
• POWER mode is recommended for rotation
speed. (
Page 15)
3
3
Bring the foot care head into contact with the
skin, and begin ling.
The basics of foot care
Use the product only for ling
calluses and hardened skin on the
feet.
<Use on>
Callus
ף
ס
ע
A callus is a hardened layer that forms
through repeated pressure or
abrasion.
Hardened layer
Epidermis
Derma
Things to be careful of when ling
• Filing too large an area can result in even larger
calluses forming. Therefore, be sure to leave some of
the hardened layer.
Before use After use
ץ
ף
ע
ס
פ
Hardened layer
Epidermis
Derma
Portion to be removed
Leave some of the hardened layer
• Filing a single location for a long time can cause it to
become hot with friction. To avoid this, be sure to
make small changes in the ling position while ling.
•
Filing an area too deeply can cause it to become sore
or inamed.
• Filing should be performed about once every two
weeks.
Tips for moving the foot care head
Move in the direction
indicated by the arrows.
Use your free hand to
support ling.
Sonic scrub brush
ES-EL9A
• We recommend using about once per week.
• We recommend using on areas for epilation about 2
days before actual epilation. Exfoliation may help to
prevent ingrown hairs.
ES-EL9A USA v7.indb 19 2019/1/15 下午6:18