Panasonic ES-LT67 - Parts Identification; Preparation

11
English
Parts identication













a
c
b
d







Front
Back
A Main body
1 Protective cap
2 System outer foil
3 Foil frame
4 Foil frame release
buttons
5 Power switch
Can be locked when
carrying around, or
can be set to the
sonic vibration
cleaning mode when
cleaning with water.
6 Lamp display
a. Shaving sensor
lamp (
)
b. Battery capacity
lamp
c. Switch lock lamp
(
)
d. Charge status
lamp (
)
7 Appliance socket
8 Outer foil section
9 System outer foil
release buttons
 Inner blades
; Trimmer
 Trimmer handle
B AC adaptor (RE7-87)
 Adaptor
 Power plug
 Cord
 Appliance plug
Accessories
C Cleaning brush
D Oil
Preparation
Charging the shaver
• Turn the shaver off.
• Wipe off any water droplets on the appliance socket.
1
Insert the appliance plug into
the shaver�
2
Plug the adaptor into a
household outlet�
• Check that the charge status
lamp (
) is glowing.
• Charging is completed after
approx. 1 hour.
• If the shape of the plug does not
tthepoweroutlet,usean
attachment plug adaptor of the
properconguration.
3
Disconnect the adaptor after
charging is completed�
1
2