Panasonic ES-LT6A

30
English
Operation and display of the switch lock
►Locking the power switch
1. Press the
power switch
once and then
release.
• The shaver
starts
operating.
2.
Press the power
switch for more
than 2 seconds
when the
shaver is
operating.
• The shaver
will stop
operating.
3. Release the
power switch.
The switch lock
lamp is off.
The switch lock
lamp will light up.
The switch lock
lamp will turn off
after 5 seconds.
►Unlocking the power switch
1. Press the power switch
for more than 2 seconds.
2. Once the shaver starts
operating, release the
power switch.
The switch lock lamp will
blink.
The switch lock lamp will
turn off.
►Checking the power switch is locked
Press the power switch while it is locked.
The switch lock lamp will blink and then turn off after
5 seconds.
• You can also check this by unplugging the AC adaptor
while charging.
ES-LT6A_2A_CH.indb 30 2016/01/27 15:42:30