Panasonic ES-LT6A

31
English
Charging the shaver
1
1
Insert the appliance plug into
the shaver.
• Turn the shaver off before
inserting.
2
2
Plug in the adaptor into a
household outlet.
• Wipe off any water droplets on
the appliance socket.
• Check that the charge status
lamp (
) is glowing.
1
2
• Charging is completed after approx. 1 hour.
The charging time may differ with the charging
capacity.
• Charging the appliance after each use will not
affect the battery life.
3
3
Disconnect the adaptor after charging is
completed.
• Charging the battery for more than 1 hour will not
affect battery performance.
While charging
ES‑LT6A ES‑LT2A
The charge status lamp ( )
glows.
The number of the battery
capacity lamp will increase
as charging progresses.
The charge status lamp ( )
glows.
After charging is completed
ES‑LT6A ES‑LT2A
The battery capacity lamp
and the charge status lamp
(
) will light up and then
turn off after 5 seconds.
The charge status lamp ( )
turns off.
ES-LT6A_2A_CH.indb 31 2016/01/27 15:42:30