8
English
<Avoid using on>
Blister
A blister is a fluid-filled, bean-sized bulge
caused by shoes rubbing against the skin or
horizontal bar exercises etc. It is caused by
sudden stimulus to the skin.
d Fluid
Corns
A corn forms when a hardened layer thickens
and extends deep into the derma. Applying
pressure to a corn stimulates the nerves and
can be very painful.
e Core
Wart
A wart is a raised area caused by a virus
entering a wound and causing cells to multiply.
Darkly-colored bumps may be visible and the
affected area may be slightly painful.
Things to be careful of when filing
Before use After use
a Hardened layer
b Epidermis
c Derma
d Portion to be removed
e Leave some of the
hardened layer.
• Filing an area too deeply can cause it to become sore or
inflamed.
• Filing too large an area can result in even larger calluses
forming. Therefore, be sure to leave some of the hardened
layer.
Wet/foam shaving
Shaving with soap lather makes the skin slippery for a closer
shave.
1
1
Attach the shaver head [H].
2
2
Remove the bikini comb [G].
3
3
Check that the outer foil is not deformed or
damaged.
4
4
Wet your skin and put soap lather on your skin.
• Do not use shaving cream, skin cream or skin lotion as it
will clog the blades.
5
5
Press the OFF/ON switch [K] to turn on the
power.
Foot care
ES‑WD94
The basics of foot care
Do not use the product for filing anything
other than calluses and hardened skin on the
feet.
<Use on>
Callus
A callus is a hardened layer that forms
through repeated pressure or abrasion.
a Hardened layer
b Epidermis
c Derma
ES-WD94_24_ASIA.indb 8 2011/12/21 19:51:31
To Next Page
Loading...
