Charging
• Wipe the charging socket dry before use if there are
water drops in it.
1
ConnecttheACadaptor.
a
Open the charging socket cover, and then
insert the appliance plug into the charging
socket on the main body.
b
Insert the adaptor into a household outlet.
❶
❷
Note
There may be moisture inside the main unit (water tank
and suction hose) left from the distilled water used for
product testing.
Aboutthechargingreminder
function
• During use, charging is required
when the low battery / charge
status indicator (red) ashes
(once a second).
• After turning o the power
switch "
" when the battery has
little remaining charge, the low
battery indicator will light o after
5 seconds.
Low battery
(once a
second)
(
Flashing
)
Indicatordisplayduringcharging
Charging
in
progress
Charging
complete
Charging
abnormal
(Flashing in red
twice a second)
(
Lights on
Lights o
)
(
Flashing
)
How to check if charging is completed
• After charging is completed, if you disconnect
the power plug and then plug in the power plug
again to charge,
(the low battery / charge
status indicator) lights on and then lights o after
about 5 seconds.
11
EW-DJ4B EU0713.indb 11 2022/7/14 下午1:40