b
Remove the water tank from the
main unit, and then take out the
bottom cover.
Howtoremovethebottom
cover
a
Rotate the bottom cover until
the "
" mark on the water tank
is aligned with the "
" mark on
the bottom cover.
b
Remove the bottom cover.
c
Clean it with water.
• When draining, do not hit the
appliance on the washbasin or the
like.
ⓑ
ⓐ
4
Storeitafteritisdry.
a
Wipe away the water with a
towel or the like and dry them in
a well-ventilated shade.
b
Store the nozzle and the main
unit.
・
Attach the bottom cover onto
the water tank.
・
Do not get your ngers pinched
in
on the nozzle storage
unit.
Nozzle storage unit
Gently rotate the main
unit and push it into
the water tank.
(Until the protrusion fits
into the groove.)
Howtoattachthebottom
cover
a
Align the "
" mark on the
water tank with the "
" mark
on the bottom cover, and
attach the bottom cover.
b
Rotate the bottom cover until
the "
" mark on the bottom
cover is aligned with the "
▲
"
mark on the water tank.
ⓐ
ⓑ
Iftherubberringofthebottom
covercomeso
・
Keep the convex part of the
rubber ring facing outward, and
install the rubber ring onto the
bottom cover.
Convex
part
Notes
• Do not wash with lukewarm water exceeding 50 °C.
• Use neutral kitchen detergent and rinse well with
water to ensure no detergent remains after cleaning.
• Never use thinners, benzine, or alcohol.
(Doing so may cause malfunction, cracking or
discolouration of the parts.)
• The water tank and the bottom cover can be washed
in a dish washer.
16
EW-DJ4B EU0713.indb 16 2022/7/14 下午1:40