Panasonic EW1513

English
4
Store it after it is dry.
a

Wipe any water away from the
nozzle and the main unit with a
towel or the like, and dry them
in a well-ventilated shade.
b

Put the main unit upright on the
charging stand.
• Attach the bottom cover, and
put the main unit upright on
the charging stand.
How to attach the bottom
cover
a

Insert the claws (2 places) on
the front of the bottom cover
into the main unit.
b

Press in the hooks (2 places) on
the back.
ⓐ
ⓑ
Notes
• Do not wash with lukewarm water exceeding 50 °C.
• Use neutral kitchen detergent and rinse well with
water to ensure no detergent remains after cleaning.
• Never use thinners, benzine, or alcohol.
(Doing so may cause malfunction, or cracking or
discolouration of the parts.)
If the identication ring comes o󰀨
Align the nozzle with the identication
ring (in any direction) to install it.
• Even if the identication ring is not
attached, the performance of the
nozzle is not a󰀨ected.
When the water jet is poor
Remove the dirt from the lter (the tip of the suction
hose).
Filter
Rub it gently with a soft brush.
When dirt is a concern
Wipe with a dry cloth.
(Do not rinse it with water.)
Charging stand AC adaptor
Filter
Suction
hose
Brush
14 15