Panasonic FP-7718

5-2
Code Function Condition Message display
No.
76543210
06 a) Toner level detection Toner is empty ↑
b) Copier paper exit sensor Paper is not detected. ↑
c) Total counter Total counter is not connected. ↑
d) Key counter Key counter is not installed. ↑
15 a) Waste toner bottle full sensor Toner is full ↑
b) Toner bottle position sensor When the toner bottle is in the ↑
home position
20 For FA-S615
a) Bin lower limit switch Bin is placed less than lower ↑
limit.
b) Bin cam home position sensor Cam in home position. ↑
c) Tamper home position sensor Bar in home position. ↑
d) Transfer motor clock sensor Clock signal is detected. ↑
21 For FA-S615
a) Bin paper detecting sensor Paper is not detected. ↑
b) Paper detection sensor for JAM Paper is not detected. ↑
C)Stapler detection sensor Stapler is not installed. ↑
22 For FA-S680
a) Sorter interlock switch Sorter is installed. ↑
b) Paper transport cover open/close Cover opened. ↑
For FA-S280
a) Sorter interlock switch Sorter is pulled out ↑
23 For FA-S680
a) Bin home position switch Bin in home position ↑
b) Bin cam switch Bin cam in home postion ↑
c) Tamper home position Tamper in home position ↑
sensor
For FA-S280
a) Sorter cam sensor Sorter cam in home position ↑
b) Sorter bin position sensor Sorter bin in home position ↑
2) Input Check For FP-7728/7735