Panasonic FP-7718

5-3
Troubleshooting
3) Input Check (FP-7718/7722)
■■ : Lighting
Code Function Condition Light Exposure indicator ➞ Dark
No.
■■■■■■■
01 a) Registration roller paper pass Paper is not detected.
■■
sensor
b) Mirror home position sensor Mirror unit in home position.
■■
c) Lens home position sensor Lens unit in home position.
■■
02 a) Copier front cover Cover opened.
■■
b) Developer unit detecting sensor Developer unit is not
■■
detected.
c) +5V line error signal +5V line is defective.
■■
03 Original size Ledger/A3
■■ ■■ ■■ ■■
detection sensor Legal/B4-FLS
■■ ■■ ■■
Letter/A4
■■ ■■ ■■
Letter R/A4R
■■ ■■
Invoice/A5
■■
04 a) Sheet bypass paper detecting Paper is not detected.
■■
sensor
b) Sheet bypass paper size Ledger/A3
■■ ■■
detection sensor Legal/B4-FLS
■■ ■■ ■■
(except FP-7718) Letter/A4
■■
Letter R/A4R
■■
Invoice/A5
■■ ■■
c) Platen open/close sensor Platen is closed.
■■
d) Platen angle sensor Platen is not open more
■■
than 30 degrees.
e) Copier paper feed cover Cover is opened
■■
05 a) Developer cooling fan motor Motor is locked.
■■
b) +10V line error signal +10V line is defective.
■■
c) Discharge lamp error signal 1 Lamp is lit.
■■
d) Discharge lamp error signal 2 Lamp is lit.
■■
e) Dust collecting fan motor Motor is locked.
■■
f) Suction fan motor Motor is locked.
■■
g) High voltage leak detection High voltage leak is not
■■
(Separation corona) detected. (Normal)
➞