Panasonic FP-7718

5-4
Code Function Condition Light Exposure indicator ➞ Dark
No.
■■■■■■■
06 a) Toner level detection Toner is empty
■■
b) Copier paper exit sensor Paper is not detected.
■■
c) Paper detection sensor Paper is not detected.
■■
(FP-7718)
d) Paper pass sensor (FP-7718) Paper is not detected.
■■
e) Paper limit sensor (FP-7718) Paper is full
■■
f) Total counter Total counter is
■■
not connected.
07 a) Exhaust fan motor 1 Motor is locked.
■■
b) Exhaust fan motor 2 Motor is locked.
■■
c) Optics fan motor 1 Motor is locked.
■■
d) Optics fan motor 2 Motor is locked.
■■
e) Optics fan motor 3 (FP-7722) Motor is locked.
■■
f) Exhaust fan motor 3 (FP-7722) Motor is locked.
■■
09 For FP-7722
a) Paper detection sensor Paper is not detected.
■■
(Copier lower paper tray)
b) Paper limit sensor 2 Paper is full.
■■
(Copier lower paper tray)
c) Paper pass sensor Paper is not detected.
■■
(Copier lower paper tray)
d) Paper level sensor 2 Paper is empty or tray is
■■
(Copier lower paper tray) pulled out.
e) Paper limit sensor 2 Paper is full.
■■
(Copier upper paper tray)
f) Paper detection sensor Paper is not detected.
■■
(Copier upper paper tray)
g) Paper pass sensor Paper is not detected.
■■
(Copier upper paper tray)
➞