Panasonic FP-7718

Adding Paper
|=} (FP-7718/7722)/Add paper (FP-7728/7735)
Mi 550 Sheet Paper Tray
Pull paper drawer/tray out of
copier
@ The FP-7718 has only 1 paper
drawer/tray
Place paper into paper
drawer/tray
For better feeding, remove any wrinkled
or torn sheets
To change paper size of the paper
drawer/tray, see page 22
Make sure paper is not loaded
above overfill indicator located in
the paper drawer/tray
Overfill Indicator
an 2-sided copy!
Push paper drawer/tray back into
copier
ATTENTION * When making 2-sided copies without an automatic duplex unit, place the copies
face-up in the paper drawer/tray to the 2-sided overfill indicator
@ When the staple sorter is used
Some papers may not be suitable for stapling Please consult your service technician
if you are unsure about the type of paper you are using
36