Panasonic FP-7718

@ Paper Exit Area
@) Open front pane!
(2) Move the sorter to the left if installed
(See page 47)
(3) Open exit cover
@ Turn left paper clearing knob
(2) Remove misfed paper
Caution this fuser area may be hot
@ Open the fuser guide
(2) Check that no misfed paper Is
remaining
(3) Close the fuser guide
@ Close exit cover
(2) Close front panel
Slide the sorter against the copier
“Tn UE 52% Bis aa bole Re TR aad 2a a Sa a TS A OE, «Te
ATTENTION @ The fusing area may be hot, so use caution when removing misfed paper
@ The front panel must be opened prior to opening the exit cover
41