Panasonic FP-7830 - Page 344

6-4
(1) Pull out the upper cassette/ADU.
(2) Remove the rail stopper. (1 screw)
When the ADU is installed:
Remove the both side rail stop-
pers (2 screws)
(3) Remove the upper cassette/ADU.
FP-7818: Remove the cassette.
(2) Installation
Remove all shipping materials before installation.
Caution: Make sure the copier is unplugged before the installation.
Procedures 1 to 7: for FP-7824/7830/7835
except FP-7818
Location Procedure Check
1
(1) Open the front door.
(2) When using the exit tray, remove
the exit tray.
(3) Open the exit cover.
(4) Open the upper cassette/ADU.
2
(1) Remove the left cover. (3 screws)
(2) Remove the rear cover.
(7 screws)
(3) When the ADU is installed:
Remove the waste toner bottle
then remove the right cover.
(2 screws)
3
(1) Remove the upper cassette rail
fixing screw.
(rear side X 1)
(2) Install the sorter receiving bracket
(rear), together with the upper
cassette rail.
(1 screw: just removed, 1 screw:
included)
4
2 1
1
3
2
Sorter receiving bracket (rear)
Rail stopper
Left cover
1
2
3
4