Unpacking/
Installation
6-5
Location Procedure
Check
5
(1) Remove the upper cassette rail
fixing screw. (front side X 1)
(2) Install the sorter receiving bracket
(front), together with the upper
cassette rail.
(1 screw just removed)
6
Re-install the upper cassette/ADU
and rail stopper.
7
(1) Re-install the left cover and rear
cover.
(2) Close the exit door and front door.
(3) When the ADU is installed:
Re-install the waste toner bottle
then re-install the right cover.
8
Remove the system console left
cover. (2 screws)
1
2
9
Install the system console support
brackets.
(front and rear, 4 screws, M4 X 8)
Sorter receiving bracket (front)
To Next Page
Loading...
