2-15
Usable thermister
• Thermisters of which resistance values are within a range of 200Ω to 75kΩ.
Manufacturer Thermister type (B constant) Guide for Measuring range (°C)
3390 K -50 to +100 °C
3450 K 50 to +150 °C
4300 K +100 to +200 °C
Shibaura
Electronics Co., Ltd.
5133 K +150 to +300 °C
Note:
• The length of the wiring between the FPΣ control unit and the thermister should be less than 10m.
• A thin wire (AWG28, length: 150 mm) is used for the leader line. Connect and bundle the wire without
any stress.
• It is recommended to mount parts such as condensers externally if the converted value is unstable.
To Next Page