Panasonic FPG-XY64D2P-A User Manual (English)

Questions and Answers:

T
tracy07Aug 17, 2025
Why is the ERROR/ALARM LED on my Panasonic Controller ON?
- J
  josephwilliamsAug 17, 2025
  If the ERROR/ALARM LED is ON because the system watchdog timer has been activated, set the mode selector of the Panasonic Controller from RUN to PROG mode and turn the power off and then on. If the ERROR/ALARM LED turns on again, there is probably an abnormality in the CPU. Please contact your dealer. If the program execution time is too long, set the mode selector from PROG to RUN mode. If the ERROR/ALARM LED turns on, check if instructions such as JP or LOOP are programmed in such a way that a scan can never finish. Also, make sure that interrupt instructions are executed in succession. Finally, check if the ERROR/ALARM LED is flashing.
T
Thomas SnyderAug 20, 2025
What to do if Input indicator LEDs are ON in Panasonic FPG-XY64D2P-A Controller?
- H
  heathermartinAug 20, 2025
  If the input indicator LEDs are ON, monitor the input condition using FPWIN Pro. If the input monitored is TRUE, check the leakage current at the input devices and check the program again. Also, check for duplicate output errors and for outputs having been rewritten by high-level instructions. Check the program flow when instructions such as MC or JP are used. If the input monitored is FALSE, please contact your dealer.
S
Sarah WilsonAug 23, 2025
What to do if Input indicator LEDs are OFF in Panasonic Controller?
- R
  Rachel RushAug 23, 2025
  If the input indicator LEDs are OFF, check the wiring of the input devices and check that the power is properly supplied to the input terminals. If the power is not supplied to the input terminal, check the input device and input power supply. If the power is properly supplied to the input terminal, please contact your dealer.
R
ryan16Aug 26, 2025
What to do if Output indicator LEDs are OFF in Panasonic FPG-XY64D2P-A Controller?
- K
  Kristina ParkerAug 26, 2025
  If the output indicator LEDs are OFF, monitor the output condition using FPWIN Pro. If the output monitored is TRUE, set the output to TRUE by force using FPWIN Pro. If the output indicator LED remains OFF, please contact your dealer.
H
Hunter KleinAug 28, 2025
How to fix ERROR/ALARM LED flashing on Panasonic FPG-XY64D2P-A Controller?
- K
  Katherine EstradaAug 28, 2025
  If the ERROR/ALARM LED is flashing on your Panasonic Controller, choose [Clear] in the PLC Status dialog box while in PROG mode. Alternatively, turn the power supply off/on while in PROG mode (this clears all of the contents of the operation memory except hold type data). As another option, execute the self-diagnostic error set instruction F148_ERR.
Q
qpageAug 31, 2025
Why are all LEDs OFF on my Panasonic Controller?
- S
  scott45Aug 31, 2025
  If all LEDs are OFF on your Panasonic Controller, check the power supply wiring. Also, check if the power supplied to the CPU is in the range of the rating and be sure to check the fluctuation in the power supply. If the power supplied to the CPU is shared with other devices, disconnect the power supply wiring to the other devices. If the LEDs on the CPU turn on at this moment, increase the capacity of the power supply or prepare another power supply for other devices. Please contact your dealer for further information.
D
David JohnsonSep 2, 2025
What to do if outputs do not function correctly on Panasonic Controller?
- H
  hernandezchristinaSep 2, 2025
  To troubleshoot output malfunctions in your Panasonic Controller, first, check the wiring of the loads. Then, check if the power is properly supplied to the loads. If the power is properly supplied to the load, check the load again for any abnormalities. If the power is not supplied to the load, please contact your dealer.
L
Laura FrancoSep 5, 2025
How to fix Panasonic FPG-XY64D2P-A Controller PROG Mode when it does not Change to RUN?
- K
  Kevin HarrisSep 5, 2025
  If the PROG mode does not change to RUN on your Panasonic Controller, check to see if the ERROR/ALARM LED is flashing. Locate the syntax error by executing Monitor ? PLC Status.
C
caitlinodomSep 8, 2025
How to resolve Password Protection Error Message on Panasonic Controller?
- J
  jaredgonzalezSep 8, 2025
  To resolve password protection errors on your Panasonic Controller, navigate to Online ? Security Settings. Then, enter your password under "PLC Access" and choose [Login].
A
ataylorSep 12, 2025
How to troubleshoot No RS485 Communication on Panasonic FPG-XY64D2P-A?
- R
  Ronald BarrettSep 12, 2025
  To troubleshoot No RS485 Communication in your Panasonic Controller, make sure the transmission cables have been securely connected between the two (+) terminals and the two (-) terminals of the stations. Ensure the characteristics of the transmission cables are within the specified range and all cables in the link are of the same type. Verify the terminating resistors have been correctly set on the first and on the last station only. Check that link areas do not overlap. When using FPG-COM4, set the baud rate in the system registers to either 19200bit/s or 115200bit/s and set DIP switch SW1-2 of the cassette to the same setting.