Panasonic FPG-XY64D2P-A - Sample Program for Fixed Schedule and Automatic Start; Sample Program for 30-Second Compensation

FPΣ User's Manual
3.6 Clock/Calendar Function
37
3.6.3 Sample Program for Fixed Schedule and Automatic Start
In this example, the clock/calendar function is used to output the Y0 signal for one second at
8:30 a.m. every day. Here, the hour/minute data stored in special data register DT90053 is
used to output the signal at the appointed time. The value of DT90053 is written using a
system variable.
GVL
POU Header
LD Body
3.6.4 Sample Program for 30-Second Compensation
This is a program to perform the compensation for 30 seconds when R0 turns to TRUE. If the
30-second compensation is required, use this program.
POU Header