VF080177SS
BENEFITS
• Rust-proof paint treatment on galvanized housing
• Thermal fuse protection
• Meets Washington State Ventilation and Indoor Air Quality
code and ASHRAE 62.2 -2007
• 3 Year Warranty
N/A=not applicable
w.g.=water gauge
S.P.=static pressure
Specifications
FV-04VE1
40 CFM 20 CFM 10 CFM
Characteristics
Static pressure in inches w. g. 0.1 0.1 0.1
Air Volume Exhaust (CFM) 40 20 10
Air Volume Supply (CFM) 30 20 10
Noise (sones) 0.8 <0.3 N/A
Power Consumption (Watts) 23 21 17
Speed 1479 1292 1095
Current 0.15 0.10 0.09
Power Rating (V/Hz) 120/60
Specifications
Motor Type Condenser
Type of Motor Bearing Ball
Thermal Fuse Protection Yes
Blower Wheel Type 2 x Sirocco
Apparent Sensible
Effectiveness
Heating (%) 32 °F (0°C) 66% at 30 CFM
Total Recovery
Efficiency
Cooling (%) 95 °F (35°C) 36% at 29 CFM
Note: CFM and sones are tested and certified in accordance with HVI testing standards.
Energy efficiency is tested in accordance with CSA-C439 standard.
Headquarters
Panasonic Home & Environment Company
One Panasonic Way
Secaucus, NJ 07094
Panasonic Home & Environment Company Unit of Panasonic Corporation of North America
Design and specifications subject to change without notice.
Customer Service
Panasonic Home & Environment Company
5201 Tollview Road
Rolling Meadows, IL 60008
For Order Information:
PHONE: 866-292-7299; FAX: 888-553-0723
For Customer Call Center:
PHONE: 866-292-7292
www.panasonic.com/building
Printed with soy ink on
10% post-consumer
recycled paper.
22-1/2 in.
5 in.
10-3/4 in.
3-3/8 in.
5-9/16 in.
8-5/8 in.
8-1/2 in.
4-1/2 in.
20-3/4”
16-3/4”
18-1/2”
13-1/2”
7-7/8”
13-1/2” to 16”
22-1/8”
4”
4”
6-5/8”
13-1/2” to 16”
2 x 4" ducts
FV-04VE1
Optional Exterior Wall Cap
FV-WC04VE1
To Previous Page
Loading...
