2 Long screws (M4X30)
Fig. 17
3. Insert the fan body between joists.
Make sure the fan body is level and square
(perpendicular) with the joists. (Fig. 16)
4. Secure the suspension bracket to joists by using long
screws (M4X30). (Fig. 17, Fig. 18)
inches mm()
11
5. Secure the suspension bracket to fan body by using
screw (M4X10). (Fig. 18)II
6. Follow step 5 to 9 of installation (page 7, page 8)
to complete the installation work.
I
Adaptor
Fan body
Joists
Junction box
Fig. 16
Fig. 18
Joist
4 Long screws (M4X30)
2 Screw
(M4X10)
II
CAUTION:
Ensure that distance B is no more than 1/2 inch (13 mm).
13 1/4~15 1/2 ( 336~394 )
16 1/2~18 3/4 ( 419~480 )
21 1/4~23 1/2 ( 540~597 )
Suspension bracket
no more than 1/2 (13)
B
A
Joist
To Next Page
Loading...
