Panasonic FV-11VHL1 - Wiring Diagram; Circulation fan unit; Ventilation fan unit; Junction box

MAINTENANCE CONTINUED
3. Remove dust and dirt from fan body using a vacuum cleaner.
(Remove fluoroccont lampe and incandescent lamp
(FV-11VHL1 only) if necessary.) (Fig.10)
4. Using a cloth dampened with kitchen detergent, remove
any dirt from fan body. Wipe dry with new cloth. (Fig.11)
6. Replace bulbs (FV-1VHL1 only) and grille.
PRACTICAL GUIDE TO INSTALLATION
Proper insulation around те fen to minimize
building heat loss and gain.(Fig.12)
ocean lage)
Loose fill or Бай insulation can be placed аа
directly over the fan housing in the attic.
Panasonic fans and fanllight combination эз илии пя betore elbow
units do not create excessive heat that is а
common problem with recessed light
fixtures or some competitors’ fan/light
combinations. Our efficient, cool-running
motors and ош fluorescent bulbs do not
create enough ambient heat to be subjected
to these limitations.
Cau bon to drywall
Dryer-tood
type vent
ith
Short ресе ofesible duct
фер» aignmert and absorbs
Sound. Champs es ape oh
покри Fol tape tightly covers ali metat
‘uct ние ое PVC fons).
Fig. 12
PRODUCT SERVICE
Warning concerning removal of covers.
This unit should be serviced by qualified technicians only. No service information is provided for customers. Your productis
designed and manufactured to ensure a minimum of maintenance. However, should your unit ever require service, a
nationwic
system of factory service centers and AUTHORIZED INDEPENDENT SERVICE CENTER is m:
support your product's warranty. (In the U.S.A, call 1-865-292-7282 to locale the PASC Authorized Service Center nearest
you.)
PANASONIC CONSUMER ELECTRONICS COMPANY
One Panasonic Way, Secaucus, NJ 07094
PANASONIC САМАРА ІМС.
5770 Ambler Drive, Mississauga, Ontario L4W 273
www.panasonic.ca
tained to