Panasonic FZ-M1 Series - Connect Your Computer to a Power Outlet; Turn on the Computer; Setup Windows

27
Getting Started
2 Connect your computer to a power out-
let.
The battery charging starts automatically.
CAUTION

Do not disconnect the AC adaptor until the fi rst-time
operation procedure is completed.

When using the computer for the fi rst time, do not con-
nect any peripheral device (including wired LAN cable)
except the battery pack and AC adaptor.

Handling the AC adaptor

Problems such as sudden voltage drops may arise dur-
ing periods of thunder and lightning. Since this could
adversely affect your computer, an uninterruptible
power source (UPS) is highly recommended unless
running from the battery pack alone.
3 Turn on the computer.
Press the power switch (

page 24) until the power
indicator (

page 23) lights. (

page 31)
CAUTION

Do not press the power switch repeatedly or do not
hold the power switch for four seconds or longer.

Any changes from the default setting of the Setup Util-
ity must not be made until the First-time Operation is
completed.
4 Setup Windows.
Follow the on-screen instructions.

The computer restarts several times. Do not touch
the screen or tablet buttons, and wait until the drive
indicator has turned off.

After the computer is turned on, the screen remains
black or unchanged for a while, but this is not a
malfunction. Wait for a moment until the Windows
setup screen appears.
㪈
㪉
2
DFQW5887ZATFZ-M1mk1-OI8.1M.indb27DFQW5887ZATFZ-M1mk1-OI8.1M.indb27 2014/01/1712:22:202014/01/1712:22:20