To Next PageTo Next PageWhat to do if my Panasonic FZ-M1 Tablet displays 'Remove disks or other media'?
If your Panasonic Tablet displays a message like 'Remove disks or other media', and you have a device connected to the USB port, disconnect the device. Alternatively, set [USB Port] to [Disabled] in the [Advanced] menu of the Setup Utility. If the problem continues after disconnecting the device, it may indicate a flash memory failure.
Why does the pointer not work on my Panasonic Desktop?
If the pointer does not work on your Panasonic Desktop, and you are using an external mouse, connect it correctly. If using an external keyboard, restart the computer using the keyboard. If the computer does not respond to keyboard commands, read 'No response'.
How to connect my Panasonic FZ-M1 to a network?
To connect to a network on your Panasonic Tablet, set the device ([Wireless LAN] / [Bluetooth] / [Wireless WAN] of [Wireless Configuration]) to [Enabled] in the [Advanced] menu of the Setup Utility (Wireless Configuration). Also, touch (Notification) at the task tray, and then touch (All settings) - [Network & Internet] - [Airplane mode]. Set [Airplane mode] to [Off], and then set [Wi-Fi] to [On] (for wireless LAN). set [Mobile broadband] to [On] (for wireless WAN). set [Bluetooth] to [On] (for Bluetooth).
Why is there no display on my Panasonic Desktop?
If your Panasonic Desktop has no display, it may be due to the power-saving function. Touch the Windows Button to resolve this. If the computer entered sleep or hibernation, press the power switch to resume. Also, check the cable connection if using an external display, ensure the display is turned on, and verify the settings of the external display.
Why does my Panasonic FZ-M1 Tablet say 'Warming up the system'?
The 'Warming up the system' message on your Panasonic Tablet indicates that the computer is warming up before starting. Wait for the process to complete; the maximum waiting time will be displayed on the screen. If you see 'Cannot warm up the system', turn off the computer and leave it in an environment of at least 5 °C {41 °F} for about an hour before turning it on again.
How to enable Cradle USB Port on Panasonic FZ-M1?
To enable the Cradle USB Port on your Panasonic Tablet, set [Cradle USB Port] to [Enabled] in the [Advanced] menu of the Setup Utility.
Why is the screen on my Panasonic FZ-M1 disordered?
If the screen on your Panasonic Tablet is disordered, restarting the computer may help, as changing the number of display colors and resolution or connecting/disconnecting an external display can affect the screen.
Why are there red, green, or blue dots on my Panasonic FZ-M1 Tablet screen?
If you notice red, green, or blue dots on the screen of your Panasonic Tablet, or if there is unevenness in colors and brightness, it's important to know that advanced high-precision technologies are used in the production of color LCD screens, and 0.002% or less of the picture elements may be dark or remain constantly lit. Also, due to the natural characteristics of LCD screens, you may notice unevenness in colors and brightness depending on your angle of view. Hues may also vary by product.
How to check MAC address on Panasonic FZ-M1 Tablet?
To check the MAC address on your Panasonic Tablet, follow these steps: 1. Touch (All apps) - [Windows System] - [Command Prompt] or (Start) - [Windows System] - [Command Prompt] in desktop mode. 2. Input “getmac /fo list /v”, and press Enter (insert spaces correctly). 3. The MAC address of each device appears in the “Physical Address” rows. The names of each of the devices are as follows: Wireless WAN Cellular, Wireless LAN Wi-Fi (WLAN) , Ethernet LAN Bluetooth Bluetooth Network Connection. The content displayed will vary depending on the device and model. 4. Input “exit”, and press Enter.
What does '[Executing Battery Recalibration]' mean on my Panasonic Tablet?
If your Panasonic Tablet is displaying “[Executing Battery Recalibration]” screen appears, it means the Battery Recalibration was canceled before Windows was shut down last time. To start up Windows, turn off the computer by the power switch, and then turn it on again.
General| Operating System | Windows 10 Pro |
|---|---|
| Display | 7" WXGA (1280 x 800) sunlight-viewable glove-enabled capacitive multi touch display |
| RAM | 8GB |
| Storage | 128GB SSD |
| Weight | 540g |
| Connectivity | Wi-Fi, Bluetooth, optional 4G LTE |
| Rugged Features | IP65, MIL-STD-810G |
| Camera | 2MP |
