Panasonic FZ-M1 Series - Connecting to a Network

4. Insert the microSIM card into the microSIM card slot (B) with the contact side facing downward and with
the cut corner oriented as shown in the illustration.
 Do not insert the microSIM card upside down.
5. Close the microSIM card slot cover.
If the cover is not closed, the microSIM card may jump out when the computer falls.
6. Insert the battery pack and connect the AC adaptor.
To remove a microSIM card
1. Turn off the computer.
2. Disconnect the AC adaptor, remove the battery pack. ( Remove the Battery Pack)
3. Push the card.
It will come out of the slot a little bit.
4. Pull the card all the way out.
5. Close the microSIM card slot cover.
6. Insert the battery pack and connect the AC adaptor.
Connecting to a network
1. Touch (Settings) - [Network & Internet] - [Cellular].
Alternatively, touch (Start) - (Settings) - [Network & Internet] - [Cellular] in the desktop mode.
CAUTIO
N