2. Touch “Cellular”.
3. Touch [Advanced options].
If an APN is not displayed under “Internet APN”:
1. Touch [Add an APN].
2. Input detailed information such as APN, and then touch [Save].
3. Touch [OK].
You are connected to the Internet.
4. Touch arrow upper left (return to previous page).
5. If you are not connected to the Internet, select created APN profile, and then touch [Apply].
When “Use cellular instead of Wi-Fi” is set to [When Wi-Fi is poor] (default), wireless WAN connections
will be established only when there is no Internet connection via Wi-Fi.
Disconnecting to a network
1. Touch (Settings) - [Network & Internet] - [Cellular], and then touch connected ISP.
Alternatively, touch (Start) - (Settings) - [Network & Internet] - [Cellular] in the desktop mode, and then
touch connected ISP.
You can also touch on the task tray, and then touch the connected ISP to display the
connected ISP screen.
NOT
To Next Page
Loading...
