Illustrations and Terminology in this manual
This manual explains using the default setting.
“Windows 10 Pro” as “Windows” or “Windows 10”
Terms and illustrations in these instructions.
<Only when connected to the external keyboard>
≪Enter≫: This means to press the Enter key.
≪Ctrl≫ + ≪F7≫: This means to press and hold ≪Ctrl≫ key, and then press ≪F7≫ key.
The display of the key may be different from this manual according to the keyboard used. (e.g. “Delete” instead of
“Del”)
-:
Touch (Start) and then touch (Power).
Some illustrations and display examples may look different from the actual product. Some types of software are
automatically updated, and differences may occur from descriptions in this manual.
Tablet mode and Desktop mode
Windows 10 offers the tablet mode optimized for the touch panel operation, and also the desktop mode in which operation is
performed using the keyboard and touch panel.
The mode can be switched by touching (Notification), and then touching (Tablet mode) tile.
If some icons do not appear on the task bar, perform the following operations.
1. Touch and hold the task bar.
2. Select the item to display.
Regarding Windows 10
Screen Messages
Screen messages are explained in [English (United States)].
(Depending on the language preference, some screen messages in these instructions are different from the actual screen
messages. For example, [Flight mode] may be displayed instead of [Airplane mode] in some language preference)
Displaying Apps
1. Touch (All apps).
Alternatively, touch (Start) at the bottom left corner in the desktop mode.
Opening the “Settings” screen
1. Touch (Settings).
Alternatively, touch (Start) - (Settings) in the desktop mode.
Introduction
NOT
To Next Page
Loading...
