EasyManua.ls Logo

Panasonic FZ-Q2 - Page 20

Panasonic FZ-Q2
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
Useful Information
Installing Software
8
At the License Agreement screen, touch [Yes, I agree to the provisions
above and wish to continue!] and touch [Next].
9
Touch [Disk 0].
Touch [Next].
If the option is displayed, select the setting and touch [Next].
[Reinstall Windows to the System Disk to factory default.]
Select this option when you want to install Windows to the factory default. After instal-
lation, you can create a new partition. For how to create a new partition, refer to “About
the partition structure” (
page 10).
[Reinstall to the OS related partitions.]
*1
Select this option when the ash memory has already been divided into several parti-
tions and you want to keep the partition structure. For how to create a new partition,
refer to “About the partition structure” (
page 10).
*1
This does not appear if Windows cannot be installed to the recovery partition and the area us-
able by Windows.
10 At the conrmation message, touch [YES].
11
Select OS (32bit or 64bit) and touch [OK].
12
Touch [Recovery ALL Partitions.].
At the conrmation message, touch [YES].
Installation starts according to the instructions on the screen. (It will take approximately
several tens of minutes / 20 minutes.)
Do not interrupt installation, for example by turning o󰀨 the computer or performing other
operation.
Otherwise installation may become unavailable as Windows may not start up or the
data may be corrupted.
13 When Ending process screen is displayed, touch [Shut-
down.] /
[OK] to turn o󰀨 the computer.
14 Turn on the computer.
If the password is requested, enter the Supervisor Password.
15 Perform the “First-time Operation” (
page 8).
16 Start the Setup Utility and change the settings as necessary.
17 Perform Windows Update.
18 <Only for model with TPM> Clear TPM (
page 19).

Using Recovery Disc
Use the Recovery Disc in the following conditions.
You have forgotten the administrator password.
Installation is not complete. The recovery partition in the ash memory may be broken.
<Only for Windows 7 downgrade model>
To change OS from Windows 7 to Windows 10, or vice versa.

Related product manuals