Panasonic HDC-HS80 - User Manual

Other manuals for Panasonic HDC-HS80

Questions and Answers:

L
Leah WilsonSep 3, 2025
Why does my Panasonic HDC-HS80 Camcorder arbitrarily stop recording?
- M
  Michael HarperSep 3, 2025
  Use an SD card that can be used for motion picture recording. The recordable time may have shortened due to the deterioration of the data writing speed or repeated recording and deletion, using the unit, format the SD card, built-in memory or HDD. If [AGS] is [ON], record in the normal horizontal position or set [AGS] to [OFF]. If the unit is exposed to strong vibrations or shocks while recording on HDD, recording may stop to protect the HDD. Recording data on an SD card is recommended in these places.
C
Christopher TranSep 2, 2025
What to do if Panasonic HDC-HS80 Camcorder is not detected by other devices when connected by USB cable?
- A
  Andrew WillisSep 2, 2025
  When connected to other devices using only the battery, reconnect using the AC adaptor.
K
khutchinsonSep 1, 2025
What to do if SD card is not recognized in another device from Panasonic Camcorder?
- E
  Erica GreerSep 1, 2025
  Check that the device is compatible with the capacity or type of SD card (SD Memory Card/SDHC Memory Card/ SDXC Memory Card) that you inserted.
B
Brandi JensenAug 31, 2025
Why scenes or still pictures cannot be played back on Panasonic Camcorder?
- M
  Mark WilsonAug 31, 2025
  Any scenes/still pictures where the thumbnails are displayed as cannot be played back.
P
Paula ObrienAug 30, 2025
How to fix auto focus if it does not work on Panasonic HDC-HS80?
- C
  Craig BoltonAug 31, 2025
  Switch to Intelligent Auto Mode. If you are trying to record a scene which is hard to bring into focus in Auto Focus Mode, use the Manual Focus Mode to adjust the focus.
D
Daniel JonesAug 30, 2025
What to do if Panasonic HDC-HS80 cannot be operated or does not operate normally?
- S
  Stephen Church Jr.Aug 30, 2025
  Remove the battery or AC adaptor, wait about 1 minute and then reconnect the battery or AC adaptor. Then about 1 minute later, turn on the unit again. If normal operation is still not restored, detach the power connected, and consult the dealer who you purchased this unit from.
A
Anthony SmithAug 29, 2025
What to do if my Panasonic Camcorder displays “ERROR OCCURRED. PLEASE TURN UNIT OFF, THEN TURN ON AGAIN.”?
- K
  Kevin PruittAug 29, 2025
  The unit has automatically detected an error. Restart the unit by turning it off and on. If the error is repeatedly displayed even after restarting, repair is needed. Detach the power connected, and consult the dealer who you purchased this unit from. Do not attempt to repair the unit by yourself.
R
robersonpatrickAug 28, 2025
How to fix remaining battery indication if it is not displayed properly on Panasonic HDC-HS80?
- J
  jenniferstewartAug 28, 2025
  If the remaining battery capacity indication is not displayed correctly, fully charge the battery, discharge it and then charge it again.
M
Michael MillerAug 27, 2025
When connected by the USB cable, why Panasonic HDC-HS80 Camcorder is not detected by the PC?
- E
  Eric JohnsonAug 27, 2025
  If your Panasonic Camcorder is connected to a PC by the USB cable and is not being detected, try the following: * Re-insert the SD card into the unit, then reconnect the supplied USB cable. * Select another USB terminal on the PC. * Check the operating environment. * Restart the PC and turn on the unit again, then connect the supplied USB cable.
E
Erin UnderwoodAug 26, 2025
Although Panasonic HDC-HS80 Camcorder is correctly connected to a TV, images cannot be seen. What to do?
- R
  reedsusanAug 26, 2025
  If your Panasonic Camcorder is connected to a TV but you cannot see images, or the images are squeezed horizontally, please read the operating instructions of your TV and select the channel that matches the input used for the connection. Additionally, change the [TV ASPECT] setting to match the aspect ratio of the TV and adjust the setting of the unit depending on the cable connecting to the TV.

Panasonic HDC-HS80 Specifications

General

Digital zoom	2000 x
Optical zoom	34 x
Image stabilizer	Yes
Focal length range	33.7 - 1415 mm
Sensor type	MOS
Total megapixels	1.5 MP
Optical sensor size	1/5.8 \
Effective megapixels (movie)	1.3 MP
Interface	USB 2.0
Video out	1
Display diagonal	2.7 \
Maximum video resolution	1920 x 1080 pixels
Image formats supported	JPG
Still image resolution(s)	2304 x 1296
Audio system	Dolby Digital
Audio formats supported	AAC
Camera shutter speed	1/25 - 1/8000 s
Shutter speed (photo)	1/25 s
Shutter speed (video)	1/8000 s
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Compatible memory cards	SD, SDHC, SDXC
Internal storage capacity	120 GB
Product color	Black
Bundled software	HD Writer AE 3.0