Panasonic HDC-SD10PP - Page 31

31
VQT2H52
PICTURE
[QUALITY] (l 47)
[HI-SPEED BURST]
*1
(l 62)
[SELF TIMER] (l 63)
[FLASH] (l 63)
[FLASH LEVEL]
*1
(l 63)
[RED EYE]
*1
(l 64)
[SHTR SOUND] (l 64)
MEDIA SELECT
*2
When recording to the SD card, select
[SD CARD]. When recording to the built-in
memory, select [Built-in Memory].
SETUP
[DISPLAY]
The screen indications are selected as
shown in the illustration below.
[OFF] [ON]
[EXT. DISPLAY] (l 92)
[CLOCK SET] (l 34)
[SET WORLD TIME] (l 35)
[DATE/TIME] (l 34)
[DATE FORMAT] (l 34)
[ECONOMY]
[OFF]:
The power saving function is not activated.
[5 MINUTES]:
When about 5 minutes have passed without
any operation, this unit automatically turns
off to save battery life.
≥ The power save function will not activate
when:
jconnected to AC adaptor
jusing the USB cable for PC, DVD
burner, printer etc.
jPRE-REC is used
[QUICK POWER ON] (l 41)
[QUICK START] (l 41)
[REC LAMP]
The recording lamp lights up during
recording and flashes when the self-timer is
counting down. When this is set to [OFF], it
does not light during recording.
NOV 15 2009
NOV 15 2009
1h30m
R 1h20m
A
HDCSD10_TM10_TM15P-VQT2H52_eng.book 31 ページ ２００９年７月６日 月曜日 午後１時４６分