61
VQT2H52
Microphone level
[AUTO]:
AGC is activated, and the
recording level is adjusted
automatically.
[SETr ]/[SET]:
The desired recording level
can be set.
AGC: Auto Gain Control
When recording, the input level from the built-in microphones
can be adjusted.
≥ The Intelligent auto mode is set to off. (l 39)
1 Select the menu. (l 29)
[RECORD SETUP] # [MIC LEVEL] # [SETr ]/[SET]
2 Touch / to adjust the microphone input
level.
A Left
B Right
C Microphone input level
≥ Touch to activate/disactivate AGC.
When AGC is activated, the icon is surrounded by yellow and the
amount of sound distortion can be reduced. When AGC is
disactivated, natural recording can be performed.
≥ A gain value for each of the 2 directions is displayed. (The input
level of the microphones cannot be set individually.)
≥ Adjust the microphone input level so that the last 2 bars of the
gain value are not red. (Otherwise, the sound is distorted.) Select
a lower setting for microphone input level.
3 Touch [ENTER] to determine the microphone
input level and then touch [EXIT].
D Microphone input level meter
Function Effect/Setting method
HDCSD10_TM10_TM15P-VQT2H52_eng.book 61 ページ ２００９年７月６日 月曜日 午後１時４６分
To Next Page
Loading...
