97
VQT2H52
1 Connect the AC adaptor (supplied with DVD burner) to the DVD burner.
≥ You cannot supply power to the DVD burner from this unit.
2 Connect this unit to the AC adaptor and change the mode to .
3 Connect this unit to the DVD burner with the Mini AB USB Connection
Cable (supplied with DVD burner).
A Mini AB USB Connection Cable (supplied with DVD burner)
B DVD burner (optional)
≥ Insert the plugs as far as they will go.
4 Insert the disc in the DVD burner.
≥ Insert the DVD disc with the recording side down when using the DVD burner.
5 Touch the desired item.
≥ [BURN DISC]: Refer to page 98 for how to copy discs.
≥ [PLAY DISC]: Refer to page 101 for how to play back the copied discs.
To terminate the connection with the DVD burner
Touch [EXIT].
≥ Disconnect the Mini AB USB Connection Cable from this unit.
HDCSD10_TM10_TM15P-VQT2H52_eng.book 97 ページ ２００９年７月６日 月曜日 午後１時４６分
To Next Page
Loading...
