35
(ENG) VQT2M64
Advanced
Editing
2
Formatting
Please be aware that if a medium is formatted, then all the data recorded on the
medium will be erased and cannot be restored. Back up important data on a PC, DVD
disc etc.
Select the menu. (l 30)
≥ When formatting is complete, touch [EXIT] to exit the message screen.
≥ Perform a physical formatting of the SD card when the SD card is to be disposed/
transferred. (Refer to the Operation Instructions (PDF format))
≥ /
Perform a physical formatting of the built-in memory/HDD when this unit is to be disposed/
transferred. (Refer to the Operation Instructions (PDF format))
≥ Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to
vibrations or shock.
: [SETUP] # [FORMAT CARD]
: [SETUP] # [FORMAT MEDIA] # [SD CARD] or [Built-inMemory]
: [SETUP] # [FORMAT MEDIA] # [SD CARD] or [HDD]
Use this unit to format media.
Formatting built-in memory or HDD is only available with this unit.
Do not format an SD card using any other equipment such as a PC. The card may
not be used on this unit.
HDCSD60&TM60&HS60EP-VQT2M64_mst.book 35 ページ ２０１０年１月１５日 金曜日 午前９時４２分
This Manual: http://www.manuallib.com/file/2591125
To Next Page
Loading...
