Panasonic HomeHawk WINDOW

11
other forms of powerful light such as halogen lights
for long periods of time. (This may damage the
image sensor.)
• Do not place heavy objects on top of the
product.
• When you leave the product unused for a long
period of time‚ unplug the product from the
power outlet.
• The product should be kept away from heat
sources such as heaters‚ kitchen stoves‚ etc.
It should not be placed in rooms where the
temperature is less than 0 °C (32 °F) or greater
than 40 °C (104 °F). Damp basements should also
be avoided.
• The maximum communication range may
be shortened when the product is used in the
following places: Near obstacles such as hills‚
tunnels‚ underground‚ near metal objects such as
wire fences‚ etc.
• Operating the product near electrical appliances
may cause interference. Move away from the
electrical appliances.
Routine care
• Wipe the outer surface of the product with a wet
wipe.
• Do not use benzine‚ thinner‚ or any abrasive
powder.
Camera image quality
• Camera image and its quality may be affected
on the mobile device based on surroundings such
as lighting‚ brightness.
• Dirty windows and window screens affect the
camera image quality.
Regularly clean the windows and remove the
window screens.
• Rain directly falling on a window may affect the
camera image quality and human detection
performance. We recommend installing the
product on window that is not exposed to direct
rain, such as a window with a sunshade.
Protecting your recordings
• Do not remove the microSD card or disconnect
the product’s AC adaptor while reading or writing
data to the microSD card. Data on the card
could become corrupted.
• If a microSD card malfunctions or is exposed to
electromagnetic waves or static electricity‚ data
on the card could become corrupted or erased.
Therefore we recommend backing up important
data to a computer or other device.
Notice for product disposal‚ transfer‚ or return
• This product can store your private/condential
information. To protect your privacy/
condentiality‚ we recommend that you erase
information from the memory before you dispose
of‚ transfer‚ or return the product.