Panasonic BB-HCM511

*AC adaptor is sold separately.
Indoor use
BB-HCM511
Outdoor use
BB-HCM531
Parking lots
Zero Distance Management is a new
business style made possible by
Panasonic network cameras.
It allows safe, smooth, economical
business management that is totally
free from conventional distance
and time limitations.
Entrances
Constructions
Stores
System Diagram
Monitoring Site
Office
Outdoors
Power over
Ethernet hub
Broadband
router
Modem
Network
Camera
BB-HCM531
PoE Type Network Camera
See from Anywhere with a Variety
of Monitoring Environments
By sending images in both MPEG-4 and JPEG formats,
these cameras let you monitor with a variety of
environments - a PC in the office, a cell phone around
town, or a TV in a waiting room. Their PoE*
1
capability
allows them to be installed in places where it is difficult
to provide power, like near an entranceway or elevator, or
in a factory or warehouse. The BB-HCM531 can also be
used outdoors*
2
to further expand its range of application.
Using a network resolves many of the limitations that
exist for installing and using conventional analogue
cameras, to greatly expand your business opportunities
through Zero Distance Management*
3
.
*1 PoE (Power over Ethernet) supplies power through an Ethernet cable.
An optional AC adaptor can also be used.
*2 For details, see the information on the splash-resistant body on the
back of this page.
*3 For details, see the bottom of this page.
The PoE function supplies power through an Ethernet cable*. DDNS service and UPnP
compatibility make it easy for anybody to set up and use the system over the Internet.
*An optional AC adaptor can also be used.
* This logo mark is
issued by the IPv6
Ready Logo Program
Committee, an IPv6
promotion group
established mainly by
the IPv6 Forum.
Access www.viewnetcam.com for registration information.
See There
When You Can't Be There™

Panasonic BB-HCM511 Specifications

General

Camera Type	Network Camera
Effective Pixels	300, 000 pixels
Video Compression	MPEG-4, JPEG
Connectivity	Wired
Pan/Tilt	No
Wireless Standard	No
Day/Night	Yes
Frame Rate	Up to 30 fps
Operating Humidity	20 % to 80 % (non-condensing)
Resolution	640 x 480
Lens	3.6 mm
Network Interface	10Base-T/100Base-TX
Digital Zoom	2x
Protocols	HTTP, SMTP, FTP, DHCP, DNS
Operating Temperature	0°C to 40°C

Summary

See from Anywhere with a Variety of Monitoring Environments

Zero Distance Management

System Diagram

Visualizes network camera system using PoE, DDNS, and UPnP for internet setup.

Achieving Zero Distance Management with a Variety of Functions

Motion Detection Function

Detects changes via sensitivity settings, storing images or sending via email/FTP.

SD Memory Card Recording

Allows saving many images on an SD card for checking over the Internet.

Image Transfer Function

Automatically transfers images/logs via email or FTP based on preset settings.

Analogue Video Output

Enables monitoring using an existing TV or video recorder via camera's output.

Simultaneous MPEG-4 and JPEG

Sends MPEG-4 and JPEG images in multiple resolutions for versatile monitoring.

Remote PanTilt and Zoom Control

Allows remote camera angle adjustment and digital zoom for detailed viewing.

Splash Resistant Body

Allows outdoor mounting in various locations, compliant with IPX4 standard.

Part Names

Identifies and labels key components of the camera's front and rear views.

Specifications

Details technical specifications for BB-HCM511/BB-HCM531 cameras.