24
SQT0886 (ENG)
5 While holding the tightening nut A, loosen the
adjustment knob B by rotating it towards
UNLOCK to adjust the direction of this unit.
6 While holding the tightening nut A, rotate the
adjustment knob B by rotating it towards LOCK
until this unit is fastened securely.
While holding the adjustment knob B, loosen
the tightening nut A by rotating it towards
UNLOCK, and pull out this unit.
Using a Tripod Mount
The tripod mounting hole A of the tripod mount is compatible
with the screw (1/4-20 UNC) of a tripod, etc.
≥ If you attach a screw with a length of 6 mm or more to a Tripod
Mount, it may wobble.
Removing this unit from the Multi Mount
Attaching the tripod mount to a tripod, etc.
UNLOCK
HX-A1M-SQT0886_mst.book 24 ページ ２０１５年４月６日 月曜日 午前９時４６分
To Next Page
Loading...
