10
Oven Components Diagram
aa
External Air Vent
bb
Internal Air Vent
cc
Door Safety Lock System
dd
Exhaust Air Vent
ee
Control Panel
ff
Identification Plate
gg
Glass Tray
hh
Roller Ring
ii
Heat/Vapor Barrier Film
(do not remove)
jj
Waveguide Cover (do not remove)
kk
Menu Label
(for NN-S615/SA616/SA636)
id g jk ab
e
d f
h
c
Control Panel
(1) Display Window
(2) Popcorn Pad (☛ page 15)
(3) Inverter Turbo Defrost Pad
(☛ page 16)
(4) Auto Reheat Pad (☛ page 18)
(5) Auto Cook Pads (☛ page 18)
(6) Serving/Weight Pad
(☛ page 18)
(7) Power Level Pad (☛ page 14)
(8) Number Pads
(9) Timer Pad (☛ page 21)
(10) Clock Pad (☛ page 13)
(11) Quick Min Pad (☛ page 14)
(12) More/Less Pad (☛ page 15)
(13) Start Pad
One tap allows oven to begin functioning.
If door is opened or Stop/Reset Pad is
pressed once during oven operation,
Start Pad must be pressed again to
restart oven.
(14) Stop/Reset Pad
Before cooking: One tap clears memory.
During cooking: One tap temporarily
stops the cooking process. Another tap
cancels all your instructions and time of
day or colon appears in the Display
Window.
Beep Sound:
When a pad is pressed correctly, a beep will be heard.
If a pad is pressed and no beep is heard, the unit did not or cannot accept the instruction.
When operating, the oven will beep twice between programmed stages. At the end of any
complete program, the oven will beep 5 times.
To Next Page
Loading...
