Panasonic KX-DT321 - LCD (Liquid Crystal Display); AUTO DIAL;STORE; AUTO ANS;MUTE; INTERCOM

Location of Controls
3
A LCD (Liquid Crystal
Display)
B AUTO DIAL/STORE: Used
for System/Personal Speed
Dialling or storing
programme changes.
C AUTO ANS (Auto Answer)/
MUTE: Used to receive an
incoming call in hands-free
mode or mute the
microphone/handset during a
conversation.
D INTERCOM: Used to make
or receive intercom calls.
E MESSAGE: Used to leave a
message waiting indication
or call back the party who left
the message waiting
indication.
F REDIAL: Used to redial the
last dialled number.
G TRANSFER: Used to
transfer a call to another
party.
H Headset Jack
I FLASH/RECALL: Used to
disconnect the current call
and make another call
without hanging up.
J HOLD: Used to place a call
on hold.
K SP-PHONE
(Speakerphone): Used for
performing hands-free
operations.
L Navigator Key: Used to
adjust the volume and the
display contrast or select
desired items.
M Microphone: Used for
hands-free conversations.
N Flexible Buttons: Used to
seize an outside line or
perform a feature that has
been assigned to the key.
O PROGRAM: Used to enter
and exit the personal
programming mode.
P Message/Ringer Lamp:
When you receive a call, the
lamp flashes red. When
someone has left you a
message, the lamp stays on
red.