Installing KX-DT301/KX-NT303
Document Version 2009-03 15
1.
Open the cover.
2. Plug the flat cable into the
connector as shown.
3. Close the cover. 4. Connect the USB cable to
the USB port.
• Ensure that the USB cable goes
through the cable guide.
• Please use a USB cable shorter
than 3 m (9 ft 10 in).
KX-DT301
The USB Module can be connected between the DPT and the
personal computer through USB interface to implement personal
CTI (Computer Telephony Integration).
Connect to a PC
To Next Page
Loading...
